Strip Plate Poly 195

Spot coating plate for partial coating for offset printing machines.

Application

In-line printing machines:	Coating units
Packing thickness:	Bearer height
Printing substrates:	Paper, cardboard, IML
Coatings:	Dispersion and UV coatings
Cleaning agents:	Water, conventional (recommendation: Strip Plate Coating Cleaner)

Structure

Carrier:	Polyester 0,35 mm
Top:	100 % pure PVC, thickness 1.6 mm Colour: Light blue Production method: Stamped Roughness (Ra): 0.8 - 1.2 μm Microhardness: 75° Shore A
Base:	Strippable compressible anti-slip layer Compressibility at 1350 kPa: 0.110 / 0.160 / 0.250 mm ± 0.06 mm
Physical properties:	Total hardness 79° Shore A Tensile strength > 2700 N/50 mm Elongation at 500 N/50 mm <0.5 % Loss of thickness during clamping and shrinkage <1%
Stripping properties:	Relief depth: 1.6 mm Separating force 3.75 N/cm (± 1.25)
Thickness:	Nominal thickness: 1.95 mm (± 0.05 mm) Plane-parallelism (max. 1 m2): ± 0.015 mm Elongation at 500 N/50 mm <0.5 % Loss of thickness during clamping and shrinkage <1%

Product details / features

Hydrophilic thermoplastic stripping layer

• Low ink build-up on coating transfer areas
• Low cleaning agent consumption, easy and quick to clean

Deep relief (1.60 mm) - perfectly transfers coating to any shape

• Low ink build-up at cut-out areas
• Low paper waste due to spoilt sheets

Special stripping technology

• Controlled and consistent separating force requirements within a plate and from production to production
• Quick and easy to strip

Highly stable polyester carrier (0.35 mm)

• Register is not pushed out of place during clamping and production
• Can be reused many times for repeat orders
• 2-ply polyester that prevents the carrier from breaking